รองหัวหน้าภาควิชา

เพชร เจียรนัยศิลาวงศ์ (PTJ)

Assoc.Prof. Petch Jearanaisilawong

รหัส PTJ
petch.j@eng.kmutnb.ac.th
เพชร เจียรนัยศิลาวงศ์ (PTJ)

รายละเอียด

การศึกษา

Ph.D.Massachusetts Institute of Technology USA.

ความเชี่ยวชาญ

Computational Mechanics, Mechanics of Materials, Fibrous Materials

ผลงานวิจัย / ตีพิมพ์(26)

แสดง 26 รายการ — เลื่อนขึ้น–ลงในกล่องเพื่อดูทั้งหมด

  1. Crack Development of Electroplated NiW Alloys and their Wettability and Tribological properties

    Jidsucha Darayen, Suwat Ploypech, Martin Metzner, Claudia Beatriz dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat

    Journal of Metals Materials and Minerals· 2025· อ้างอิง 2
  2. Design and development of an intelligent real-time pressure sensing system for sitting posture monitoring

    Ang Qizheng, Lim Way Soong, Yeo Boon Chin, Petch Jearanaisilawong

    Edelweiss Applied Science and Technology· 2025
  3. Mechanical Properties of Asymmetric Woven Bamboo Structure from Bamboo Strips

    Ekkarin Phongphinittana, Navapon Klangtup, Petch Jearanaisilawong

    Fibers· 2025
  4. Crack development of electroplated NiW alloys and their wettability and tribological properties

    Jidsucha Darayen, Suwat Ploypech, Martin Metzner, Claudia Beatriz dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat, :unav

    Open MIND· 2025
  5. Effects of Steam Explosion on Curcumin Extraction from Fresh Turmeric Chips

    Umnat Imcharoen, Pornchai Rachtanapun, Parichat Thipchai, Ruangvate Sae Eng, Sinchai Chinvorarat, Petch Jearanaisilawong

    Plants· 2024· อ้างอิง 1
  6. Crack Development of Electroplated Niw Alloys and Their Wettability and Tribological Properties

    Jidsucha Darayen, Suwat Ploypech, Martin Metzner, Claudia Beatriz dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat

    SSRN Electronic Journal· 2024
  7. Finite element analysis of energy absorption mechanism of durian peel and durian thorns under compressive load

    Bundit Phungsara, Nadda Jongpairojcosit, Petch Jearanaisilawong

    Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials· 2023· อ้างอิง 2
  8. Finite Element Analysis of Energy Absorption Mechanism of Durian Peel and Durian Thorns Under Compressive Load

    Bundit Phungsara, Nadda Jongpairojcosit, Petch Jearanaisilawong

    SSRN Electronic Journal· 2023
  9. Dynamic behaviors and protection mechanisms of sulcata tortoise carapace

    Petch Jearanaisilawong, Nadda Jongpairojcosit, Chinnawit Glunrawd

    Computer Methods in Biomechanics & Biomedical Engineering· 2021· อ้างอิง 9
  10. Experimental investigation on durian thorns

    Bundit Phungsara, Ekkarin Phongphinittana, Petch Jearanaisilawong

    IOP Conference Series Materials Science and Engineering· 2021· อ้างอิง 3
  11. Effects of Crack Density on Wettability and Mechanical Properties of Hard Chrome Coatings

    Suwat Ploypech, Martin Metzner, Claudia Beatriz dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat

    Transactions of the Indian Institute of Metals· 2019· อ้างอิง 10
  12. Nanoindentation tests of Sulcata Tortoise’s carapace

    Nadda Jongpairojcosit, Petch Jearanaisilawong

    IOP Conference Series Materials Science and Engineering· 2018· อ้างอิง 1
  13. Compressive behavior of Sulcata Tortoise’s carapace at high rate of deformation

    Nadda Jongpairojcosit, Chinnawit Glunrawd, Petch Jearanaisilawong

    IOP Conference Series Materials Science and Engineering· 2018· อ้างอิง 1
  14. Mechanical properties and numerical simulation of Sulcata tortoise carapace

    Nadda Jongpairojcosit, Petch Jearanaisilawong

    Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials· 2017· อ้างอิง 17
  15. Determination of in-plane elastic properties of rice husk composite

    Petch Jearanaisilawong, Shayanin Eahkanong, Bundit Phungsara, Anchalee Manonukul

    Materials & Design (1980-2015)· 2015· อ้างอิง 13
  16. Compressive Response of Polyurethane Open-Cell Foam with Electrodeposited Copper Coatings

    Wisut Janphongsri, Yuttanant Boonyongmaneerat, Petch Jearanaisilawong

    Advanced materials research· 2014· อ้างอิง 1
  17. Mixed-Mode [I/III] Fracture Simulation of Rubber

    Kiatisak Permpipat, Petch Jearanaisilawong

    Advanced materials research· 2014
  18. Influence of thickness of intermetallic layers on fracture resistance of galvanized coatings

    Suwat Ploypech, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat

    Surface and Coatings Technology· 2013· อ้างอิง 20
  19. A Microstructurally-based Orthotropic Elasto-plastic Model for Paper and Paperboard

    Ekkarin Phongphinittana, Petch Jearanaisilawong

    King Mongkut’s University of Technology North Bangkok International Journal of Applied Science and Technology· 2013· อ้างอิง 3
  20. Crack initiation and propagation of galvanized coatings hot-dipped at 450°C under bending loads

    Suwat Ploypech, Yuttanant Boonyongmaneerat, Petch Jearanaisilawong

    Surface and Coatings Technology· 2012· อ้างอิง 21
  21. Design of a three-legged reconfigurable spherical shape robot

    Petch Jearanaisilawong, S. Laksanacharoen, Veeradate Piriyawong, Khatathap Swatdipisal

    · 2009· อ้างอิง 12
  22. Dynamic simulation of a reconfigurable spherical robot

    Petch Jearanaisilawong, S. Laksanacharoen

    · 2009· อ้างอิง 9
  23. A continuum model for needlepunched nonwoven fabrics

    Petch Jearanaisilawong

    · 2008· อ้างอิง 15
  24. A continuum constitutive model for the mechanical behavior of woven fabrics

    Micháel J. King, Petch Jearanaisilawong, Simona Socrate

    International Journal of Solids and Structures· 2005· อ้างอิง 209
  25. High Strain Rate Response of an Epoxy and a Vinyl Ester

    R. J. Clifton, Petch Jearanaisilawong, Tong Jiao

    Bulletin of the American Physical Society· 2005
  26. Investigation of deformation and failure mechanisms in woven and nonwoven fabrics under quasi-static loading conditions

    Petch Jearanaisilawong

    DSpace@MIT (Massachusetts Institute of Technology)· 2004· อ้างอิง 10
โปรเจคที่กำลังดูแล (0)

ไม่มีโปรเจคกำลังดำเนินการ

โปรเจคในอดีต (7)
โปรเจคที่เคยเป็นที่ปรึกษา (เสร็จสิ้น/ยกเลิก)
ปีการศึกษารหัสชื่อโปรเจคนักศึกษาบทบาทสถานะ
2568AM-2568-017

การออกแบบเครื่องกดกล้ามเนื้อหลังส่วนล่างที่สามารถคบคุมแรงกดได้

Design of lower back pressing machine with adjustable force function

ที่ปรึกษาหลักเสร็จสิ้น
2568AM-2568-018

การออกแบบสายรัดหลังเฉพาะสรีระบุคคล

Design of Personalized Back Support

ที่ปรึกษาหลักเสร็จสิ้น
2567AM-2567-011

การออกแบบและพัฒนาหน้ากากกันกระแทก

Design And Development Of Face Shield

ที่ปรึกษาหลักเสร็จสิ้น
2567AM-2567-012

การออกแบบเครื่องพยุงหลัง

Design of Back Brace

ที่ปรึกษาหลักเสร็จสิ้น
2566AM-2566-001

การจําลองไฟไนต์เอลิเมนต์ของการขึ้นรูปเลนส์

Finite element simulation of precision glass molding

ที่ปรึกษาหลักเสร็จสิ้น
2566AM-2566-002

การพัฒนาชุดขับเคลื่อนสำหรับพาหนะขนของในโรงพยาบาลรุ่นที่ 3

Development of Transportation Vehicle for Hospital Phase 3

ที่ปรึกษาหลักเสร็จสิ้น
2566AM-2566-007

ออกแบบเครื่องเก็บเกี่ยวแหน

Design of a duckweed harvesting machine.

ที่ปรึกษาหลักเสร็จสิ้น

Google Scholar

ดูผลงานตีพิมพ์และการอ้างอิง